| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Looking for a custom uke http://www-.luthiersforum.com/forum/viewtopic.php?f=10128&t=49382 |
Page 1 of 1 |
| Author: | kente777 [ Sat May 20, 2017 5:01 am ] |
| Post subject: | Looking for a custom uke |
I'm looking to have a custom soprano or concert uke commissioned. The only must-have options would be a soundport and arm bevel. PM me if you might be interested in being my builder. Thx... Ken Eckerty |
|
| Author: | dpetrzelka [ Sat May 20, 2017 5:29 pm ] |
| Post subject: | Re: Looking for a custom uke |
Ken, Aaron Keim of Mya Moe and Beansprout instruments makes wonderful ukuleles. Several friends own his work, and he specializes in ukes. https://www.thebeansprout.com |
|
| Author: | Allen McFarlen [ Sat May 20, 2017 11:53 pm ] |
| Post subject: | Re: Looking for a custom uke |
Is there a particular reason you need an arm rest on such a small instrument? To build a good uke, the builder needs to squeeze everything they can out of the soundboard, and using up what little realestate there is on a soprano or concert.....well I would suspect all pro builders would try there best to talk you out of that, or down right refuse. Sound port isn't really an issue though. |
|
| Author: | saltytri [ Fri Aug 11, 2017 3:53 pm ] |
| Post subject: | Re: Looking for a custom uke |
Allen is right on this. I even use thin, solid linings rather than kerfed to maximize the surface area that can be put to work. + on Aaron also. David onoukes.com |
|
| Author: | Goat Rock Ukulele [ Thu Oct 26, 2017 2:22 am ] |
| Post subject: | Re: Looking for a custom uke |
I often do arm bevels on tenors. I haven't done one on a concert but would not be against doing so. On a soprano no. I keep my bevels modest. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|